MRK at analytica China 2026: Six In-House Designed Centrifuges from Micro-Volume Research to Routine Testing

From 16 to 18 November 2026, analytica China (Munich Shanghai) is held at the Shanghai New International Expo Centre. MRK® Instruments is presenting six in-house designed centrifuges at Booth 3130, Hall N3, addressing three directions — micro-volume research, cell preparation and routine testing — with complete sample separation solutions for biopharma, clinical diagnostics, research, environmental analysis and food testing.
1. The biggest difference on this stand: the machines were running
Most centrifuges at a trade show are static displays. All six MRK models on this stand were powered and running, so visitors could watch acceleration curves, operating noise and vibration for themselves, and check configurations with engineers against their own sample types and throughput.
“A centrifuge runs at high frequency for years. A datasheet explains part of it, but running condition, assembly precision, noise and vibration only become visible once the machine is spinning,” said an engineer on site.
Over the three days the stand welcomed visitors from universities, research institutes, biopharma companies, hospital clinical laboratories, customs and third-party testing organisations. Conversations clustered around four topics: sample pre-treatment efficiency, temperature stability, rotor compatibility and after-sales response.
2. Products: three directions, six models
The six models on show, by application direction:
Micro-volume research — MG-1450A, MG-1650
For routine centrifugation in university research and molecular biology laboratories, compatible with microcentrifuge tubes and standard molecular workflows, with emphasis on ease of use and running stability.
Cell preparation — MGL-16MT, MH-2100R
For innovative-drug cell processes, cell therapy and biologics R&D, with emphasis on cell recovery, temperature stability and batch-to-batch consistency.
Routine testing — MD-550, MH-1650R
For sample pre-treatment in clinical testing, disease control, third-party testing and food or environmental testing, with emphasis on throughput, noise control and day-to-day reliability.
3. The four questions asked most over three days
“Can blood collection tubes be decapped without manual work?” Automated decapping was the most requested category at this show, reflecting growing concern in clinical laboratories and blood centres about labour input and aerosol risk.
“The refrigerated model is rated ±1 °C — is my sample also ±1 °C?” The panel shows chamber air temperature; actual sample temperature depends on pre-cooling, load and speed. This is the single most frequent expectation gap we discuss with customers.
“Can you customise special speeds or capacities?” Yes — but customisation means new structural design and stress calculation, prototype build and safety validation. Lead time goes into validation, not machining.
“How is after-sales support guaranteed?” MRK provides a two-year full-machine warranty, lifetime maintenance, free installation and commissioning with dedicated operator training, plus five regional sales and service centres in Shanghai, Beijing, Guangzhou, Changsha and Chengdu covering 28 provinces, municipalities and autonomous regions.
4. What happens after delivery is where long-term cost sits
Centrifuge purchasing decisions usually focus on two columns: specifications and price. Over the actual service life, however, total cost is driven by three things: whether parts remain available, whether calibration and repair are handled by the manufacturer, and whether operators were properly trained.
MRK standard service includes installation, commissioning and operator training on arrival, the complete set of official documentation (operation manual, specifications, safety instructions), spare parts and technical support beyond the warranty period, and a free one-to-one selection study based on sample type, throughput and temperature requirements.
5. After the show
The show is over, but solution evaluation and sample testing are just beginning. For requirements that could not be covered on site, MRK offers the following follow-up support:
Sample testing: verify separation performance on your own samples
Site survey: verify power supply, access route, floor loading and heat dissipation for large-capacity models
Custom assessment: feasibility and lead time for special speeds, capacities and installation dimensions
Selection study: configuration recommendations based on sample type, daily throughput and temperature requirements
For further discussion, submit your requirement through the Contact Us page or call your regional sales and service centre; an engineer will respond within one working day.
About MRK® Instruments
MRK Instruments focuses on laboratory centrifuges and their supporting workflows, covering benchtop high-speed, benchtop low-speed, refrigerated, large-capacity, automated decapping, cytology smear, crude oil water-content determination and micro/microplate series. We provide efficient, stable and precise sample separation solutions for biopharma, clinical diagnostics, research, environmental analysis and food testing. Core structures are designed and manufactured in house, with full-cycle factory service from selection and commissioning through repair and calibration.